The Medium Extended Air Defense System (MEADS) was a ground-mobile air and missile defense system that was intended in the 2020s to replace the Patriot missile system through a NATO-managed development. The program was a development of the United States, Germany and Italy.
The design of MEADS was aimed at addressing the shortcomings of fielded systems and to permit full interoperability between U.S. and allied forces. Germany chose MEADS to replace their MIM-104 Patriot systems in June 2015, but the program was later cancelled. It was superseded in the US by the Lower Tier Air and Missile Defense Sensor (LTAMDS) as a component of the Patriot system.
Description
MEADS provides ground-mobile air and missile defense with expanded coverage. The system provides enhanced force protection against a broad array of third-dimension threats. Improved interoperability, mobility, and full 360-degree defense capability against the evolving threat represent are key aspects. MEADS is the first air and missile defense (AMD) system that provides continuous on-the-move protection for maneuver forces. MEADS also provides area defense, homeland defense, and weighted asset protection.
MEADS incorporates the Lockheed Martin Missiles and Fire Control hit-to-kill PAC-3 Missile Segment Enhancement (MSE) missile in a system including 360-degree surveillance and fire control sensors, netted-distributed tactical operations centers, and lightweight launchers. A single MEADS battery is able to defend up to 8 times the area of a Patriot battery through use of advanced 360-degree sensors, near-vertical launch capability, and the longer-range PAC-3 MSE missile. The MEADS radars – using active phased arrays and digital beam forming – enable full use of the PAC-3 MSE missile's extended range.
Truck-mounted MEADS elements drive or roll on and off C-130 and A400M transport aircraft so they are quickly deployed to a theater of operations. Because MEADS uses fewer system assets, it permits a substantial reduction in deployed personnel and equipment. MEADS reduces demand for airlift, so it can deploy to theater faster.
The minimum MEADS engagement capability requires only one launcher, one battle manager, and one fire control radar to provide 360-degree defense of troops or critical assets. As more system elements arrive, they automatically and seamlessly join the MEADS network and build out capability.
The prime contractor, MEADS International, is a multinational joint venture headquartered in Orlando, Florida. Its participating companies are MBDA Italia, MBDA Deutschland GmbH, and Lockheed Martin. The company initially won a competitive downselect to develop the MEADS system in 1999, but the program could not be started because the losing competitor filed two successive suits. In 2001, a $216 million Risk Reduction Effort contract was awarded to incorporate a new interceptor approach. In May 2005, MEADS International signed a definitized contract valued at $2 billion plus €1.4 billion for MEADS design and development. This development contract was completed in 2014. The U.S. funded 58 percent of the MEADS Design and Development program, with European partners Germany and Italy providing 25 percent and 17 percent respectively.
The German Bundeswehr completed an analysis of air defense alternatives in 2010 and strongly recommended MEADS as the basis for improving Germany's missile defense shield and as Germany's contribution to the European Phased Adaptive Approach. In February 2011, the U.S. Department of Defense announced that it intended to fulfill its commitment to complete the design and development effort, but that it would not procure the MEADS system for budgetary reasons. Lockheed Martin developed an interactive life cycle cost and capabilities application based on their Dynamic Comparative Analysis Methodology (DCAM) approach to more fully evaluate and communicate the performance and cost advantage of MEADS as compared to alternative systems. The DCAM application further reinforced the value of MEADS and is credited with helping ensure continued funding.
In October 2011, the National Armaments Directors of Germany, Italy, and the U.S. approved a contract amendment to fund two flight intercept tests, a launcher/missile characterization test, and a sensor characterization test conducted to complete the planned development scope.
In September 2013, MEADS received operating certification for Mode 5 interrogation in its Identification friend or foe (IFF) system. Mode 5 is more secure and provides positive line-of-sight identification of friendly platforms equipped with an IFF transponder to better protect allied forces.
In June 2015, MEADS was selected as the basis for the German Taktisches Luftverteidigungssystem (TLVS), a new generation of air and missile defense that requires flexible architecture based on strong networking capabilities. MEADS was a candidate for Poland's Wisła medium range air defense system procurement, but was eliminated in June 2014 when competition was downselected to the US Patriot system and the French/Italian SAMP/T system. However, Lockheed Martin began renewed discussions with the Polish Ministry of Defense in February 2016 leading to a formal request for information in September 2016. MEADS remains a candidate for Poland's Narew short range air defense system procurement.
Major equipment items The MEADS air and missile defense system is composed of six major equipment items. The MEADS radars, battle manager, and launchers are designed for high reliability so that the system will be able to maintain sustained operations much longer than legacy systems, resulting in overall lower operation and support costs.
Multifunction Fire Control Radar (MFCR)
An X-band, solid-state, active electronically scanned array (AESA) radar using element-level transmit/receive modules developed in Germany. The MMIC is supplied by the Selex Sistemi Integrati foundry in Rome. The photonics foundry in Rome supplies lithium niobate () components for the radar. The MFCR radar provides precision tracking and wideband discrimination and classification capabilities. For extremely rapid deployments, the MEADS MFCR can provide both surveillance and fire control capabilities until a surveillance radar joins the network. The MFCR uses its main beam for uplink and downlink missile communications. An advanced Mode 5 identification friend-or-foe subsystem supports improved threat identification and typing.
Surveillance Radar (SR)
The UHF MEADS Surveillance Radar is a 360-degree active electronically steered array radar that provides extended range coverage. It provides threat detection capability against highly maneuverable low-signature threats, including short- and medium-range ballistic missiles, cruise missiles, and other air-breathing threats.
Tactical Operations Center (TOC)
The MEADS TOC provides battle management and C4I (command, control, computers, communications, and intelligence). It controls an advanced network-centric open architecture that allows any combination of sensors and launchers to be organized into a single air and missile defense battle element. The system is netted and distributed. Every MEADS battle manager, radar, and launcher is a wireless node on the network. By virtue of multiple communications paths, the network can be expanded or contracted as the situation dictates and precludes single point failure if one node becomes inoperable. It also has a plug-and-fight capability that allows MEADS launchers and radars to seamlessly enter and leave the network without shutting it down and interrupting ongoing operations. MEADS uses open, non-proprietary standardized interfaces to extend plug-and-fight to non-MEADS elements. This flexibility is new for ground-based AMD systems.
Launcher and Reloader
The lightweight MEADS launcher is easily transportable, tactically mobile, and capable of rapid reload. It carries up to eight PAC-3 Missile Segment Enhancement (MSE) Missiles and achieves launch readiness in minimum time. A MEADS reloader is similar but lacks launcher electronic systems.
Certified Missile Round PAC-3 MSE
The PAC-3 Missile Segment Enhancement (MSE) missile is the baseline interceptor for MEADS. The interceptor increases the system's range and lethality over the baseline PAC-3 missile, which was selected as the primary missile for MEADS when the design and development program began in 2004. The MSE missile increases the engagement envelope and defended area by using more responsive control surfaces and a more powerful rocket motor.
IRIS-T SL
In Germany, the PAC-3 MSE missile is expected to be supplemented by IRIS-T SLM as secondary missile for ground-based medium range air defense. It is based on the IRIS-T air-to-air missile equipped with an enlarged rocket motor, datalink, and jettisonable drag-reducing nose cone.
Plug-and-fight In the BMC4I TOC, plug-and-fight flexibility lets MEADS exchange data with non-MEADS sensors and shooters. The same capability lets MEADS move with ground forces and interoperate with allied forces. Through interoperability features designed into the system, MEADS will dramatically improve combat effectiveness and situational awareness, reducing the possibility of friendly fire incidents. MEADS system elements can seamlessly integrate into each nation's, or NATO's, combat architecture as required.
Units can be dispersed over a wide area. Command and control of launchers and missiles can be handed over to a neighboring battle management unit while the initial systems are moved, maintaining maneuver force protection. Plug-and-fight connectivity lets MEADS elements attach to and detach from the network at will, with no requirement to shut the system down.
The MEADS plug-and-fight capability enables command and control over other air and missile defense system elements through open, non-proprietary standardized interfaces. MEADS implements a unique ability to work with secondary missile systems if selected, and to evolve as other capabilities are developed.
Integration and test history In July 2010, the MEADS BMC4I demonstrated its interoperability with the NATO Air Command and Control System (ACCS) during tests using the Active Layer Theatre Ballistic Missile Defense (ALTBMD) Integration Test Bed being developed by NATO. The test was an early maturity demonstration for the MEADS BMC4I capability.
In August 2010, the MEADS program completed an extensive series of Critical Design Review (CDR) events with a Summary CDR at MEADS International. Reviewers from Germany, Italy, the U.S., and the NATO Medium Extended Air Defense System Management Agency (NAMEADSMA) evaluated the MEADS design criteria in a comprehensive series of 47 reviews.
In December 2010, the first MEADS launcher and Tactical Operations Center were displayed in ceremonies in Germany and Italy before initiating system integration tests at Pratica di Mare Air Force Base in Italy.
In November 2011, it was announced that the MEADS Multifunction Fire Control Radar had been integrated with a MEADS TOC and launcher at Pratica di Mare Air Force Base. The objectives of the integration test series were to demonstrate that the MEADS TOC could control the MEADS MFCR in coordination with the MEADS Launcher as initial operational proof of the plug-and-fight capability. The MFCR demonstrated key functionalities including 360-degree target acquisition and track using both dedicated flights and other air traffic. Then, at White Sands Missile Range, MEADS demonstrated a first-ever over-the-shoulder launch of the PAC-3 MSE missile against a simulated target attacking from behind. It required a unique sideways maneuver, demonstrating a 360-degree capability. The missile executed a planned self-destruct sequence at the end of the mission after successfully engaging the simulated threat.